Depending on your HVAC equipment a preventative maintenance check for heating and cooling equipment should include (if applicable) checking the thermostat, tightening all electrical connections, lubricating all moving parts, checking and inspecting the condensate drain, checking the air filter, checking the blower wheel and capacitor, checking the heat exchanger, checking for gas leaks, checking the flame sensor, testing safety controls, checking the compressor, testing temperature drop, inspecting for refrigerant leaks, checking the condenser fan motor and more. Our Gold and Platinum plans meet Energy Star recommendations. Our Platinum Plan meets the ACCA National Standard Task list qualification as well.
Benefits of Maintenance
- Prolongs equipment efficiency
- Promotes healthy clean air
- Supports lower utility costs
- Guards against unexpected failures
- Prolongs equipment life
- Keeps your equipment warranty valid
Home Comfort Protection Plans
Silver
Starting at
$23.00
Per Month Covers 2 Units
Program Benefits
- 2 year parts and labor warranty
- No Service Charge
- 24 Hour Priority Status for repairs
- Pre-Season Scheduling
- Minimum 10% discount on repair parts
- Discount on Accessories
More Information
Gas or Electric Furnace
- Check Air Filter
- Check Blower Motor and Capacitor
- Check Blower Wheel
- Test All Controls/Switches/Relays Contactors
- Check Transformer
- Measure Line Voltage
- Inspect Electrical Wiring and Connection
- Inspect Condensate Traps/Drains
- Visually Inspect Heat Exchanger
- Check Gas Pressure Set-Point
- Check for Gas Leaks
- Check for Heating Elements
- Check Sequencers
- Check Flame Sensor (cleaning included)
- Check Burner/Pilot/HSI
- Check Thermostat
- Check System Temperature Rise/Drop
- Test Safety Controls
- Check Pressure Switch Static Pressure
- Check Inlet/Exhaust/Flue Pipe/Inducer
Oil Furnace or Oil /Gas Boiler
- Replace Nozzle (oil)
- Measure Line Voltage
- Check Blower Motor/Capacitor
- Check Primary Control (oil)
- Check Blower Wheel
- Check Oil Pump Pressure
- Check and Adjust Electrodes
- Check Inlet/Exhaust/Flue Pipe (recommend to customer if needs cleaning)
- Check for Oil Leaks
- Inspect Electrical Wiring and Connections
- Test all Controls/Switches/Relays/Contactors
- Check Temperature Rise/Drop
- Check T/P Pop-off Valve
- Check Thermostat
- Check Transformer
- Check Boiler Filter
- Check Oil Filter
- Check Condensate Drains/Traps
- Check Circulating Pump (boiler)
- Check Zone Valves
- Check Fill System (boiler)
- Check Boiler Set-Point Temp
- Test Safety Controls
- Check for Water Leaks (boiler)
- Check System Static Pressure
- Visually Inspect Heat Exchanger
- Check Circulating Pump (boiler)
- Check Transformer
- Check T/P Pop-off Valve
- Measure Line Voltage
- Check Zone Valves
- Inspect Electrical Wiring and Connections
- Check Fill System (boiler)
- Check Thermostat
- Check Boiler Set-point Temp (boiler)
- Test Safety Controls
- Check for water leaks (boiler)
- Check Inlet / Exhaust / Flue Pipe (recommend to cust. If needs cleaning)
- Visually Inspect Heat Exchanger (recommend to cust. If needs cleaning)
Heat Pump
- Check Defrost Control
- Inspect Condensate Traps/Drains
- Check Reversing Valve
- Check Blower Motor and Capacitor
- Check Compressor
- Check Blower Wheel (recommend to customer if needs cleaned)
- Check Condenser Fan Motor
- Check Thermostat
- Check Coils for Cleanliness (recommend to customer if needs cleaning)
- Test all Controls/Switches/Relay/Contractors
- Inspect Electrical Wiring and Connections
- Check Transformer
- Check System Temperature Rise/Drop
- Measure Line Voltage
- Check for Signs of Refrigerant Leaks
- Check Refrigerant Pressure (recommend to customer if refrigerant needed)
- Check Air Filter
- Check Super Heat/Sub Cool
- Check System Static Pressure
- Test Capacitor
Geothermal System
- Check Loop
- Inspect and Clean Condensate Traps/Drains
- Check Loop Pumps
- Check Blower Motor and Capacitor
- Check Water Solenoid Valve
- Check Blower Wheel
- Check Compressor
- Check Reversing Valve
- Check Condenser Fan Motor
- Check System Temperature Rise/Drop
- Test Capacitors
- Inspect Electrical Wiring and Connections
- Test all Controls/Switches/Relay/Contactors
- Check Coils for Cleanliness
- Check Transformer
- Check Thermostat
- Check for Signs of Refrigerant Leaks
- Check Refrigerant Pressure
- Measure Line Voltage
- Check Air Filter
- Check Super Heat/Sub Cool
- Check Temperature and Pressure In/Out
- Check Loop Pumps
Air Conditioning
- Check Air Filter
- Check Blower Motor
- Check Blower Wheel
- Check Blower Capacitor
- Test All Controls/Relays/Contactors
- Check Transformer
- Measure Line Voltage
- Inspect Electrical Wiring and Connections
- Inspect Condensate Drains/Traps
- Check Thermostat
- Check Temperature Rise/Drop
- System Static Pressure
- Check Refrigerant Pressure
- Check Super Heat/Sub Cool
- Check Compressor
- Check Coils and Recommend Cleaning If Needed
- Check for Refrigerant Leaks
- Check High/Low Pressure Switches
- Check Condenser Fan Motor
- Test Capacitor
Gold
Starting at
$34.58
Per Month Covers 2 Units
Program Benefits
- Meets Energy Star Recommendations
- 3 Year parts and labor warranty
- No Service Charge
- Same Day Priority Status
- Pre-Season Scheduling
- Minimum 10% discount in repair parts
- Discount on Accessories
- $25 per year Purchase Accrual, credit towards new equipment *Must remain in plan to keep accrual
- Media Filter replacement included
ACCA National Standard Task List
- Condensate Treatment
- Media Filter Replacement
More Information
Gas or Electric Furnace
- Replace Nozzle (oil)
- Measure Line Voltage
- Replace filter (oil)
- Check Blower Motor/Capacitor
- Check Primary Control (oil)
- Check Blower Wheel (recommend if customer needs cleaned)
- Check Oil Pump Pressure (oil)
- Check Inlet/Exhaust/Flue Pipe (recommend to customer if needs cleaning)
- Check and Adjust Electrodes (oil)
- Visually Inspect Heat Exchanger (recommend to customer if needs cleaning)
- Check for Oil Leaks (oil)
- Inspect Electrical Wiring and Connections
- Test all Controls/Switches/Relays/Contactors
- Check Temperature Rise/Drop
- Check T/P Pop-off Valve
- Check Thermostat
- Check Transformer
- Check and Replace Boiler Filter
- Check Condensate Drains/Traps
- Check Circulating Pump (boiler)
- Check Zone Valves
- Check Fill System (boiler)
- Check Boiler Set-Point Temp
- Test Safety Controls
- Check for Water Leaks (boiler)
- Check System Static Pressure
Oil Furnace or Oil /Gas Boiler
- Replace Nozzle (oil)
- Measure Line Voltage
- Replace filter (oil)
- Check Blower Motor / Capacitor
- Check Primary Control (oil)
- Check Blower Wheel (recommend to cust if needs cleaned)
- Check Oil Pump Pressure (oil)
- Check Inlet /Exhaust/ Flue Pipe (recommend to cust. If needs cleaning)
- Check and Adjust Electrodes (oil)
- Visually Inspect Heat Exchanger (recommend to cust. If needs cleaning)
- Check for Oil Leaks (oil)
- Inspect Electrical Wiring and Connections (tighten/repair if needed)
- Test all Controls/Switches/Relays/Contactors
- Check Temperature Rise / Drop
- Check T/P Pop-off Valve
- Check Thermostat (check batteries and reset filter reminder)
- Check Transformer
- Add Air Freshener
- Check Air Filter (standard filter included. recommend if hi eff. filter needs cleaned or replaced)
- Check Circulating Pump (boiler)
- Check Transformer
- Check T/P Pop-off Valve
- Measure Line Voltage
- Check Zone Valves
- Inspect Electrical Wiring and Connections
- Check Fill System (boiler)
- Check Thermostat
- Check Boiler Set-point Temp (boiler)
- Test Safety Controls
- Check for water leaks (boiler)
- Check Inlet / Exhaust / Flue Pipe (recommend to cust. If needs cleaning)
- Visually Inspect Heat Exchanger (recommend to cust. If needs cleaning)
Heat Pump
- Check Defrost Control (hp)
- Inspect and Clean Condensate Traps/Drains
- Check Reversing Valve
- Check Blower Motor and Capacitor
- Check Compressor
- Check Blower Wheel (recommend to cust. if needs cleaned)
- Check Cond. Fan Motor
- Check Thermostat (check batteries and reset filter reminder)
- Test Capacitors
- Check Coils for Cleanliness (recommend to cust. If needs cleaning)
- Test all Controls/Switches/Relay/Contactors Inspect Electrical Wiring and Connections (tighten and repair if needed)
- Check Transformer
- Check System Temperature Rise/Drop
- Measure Line Voltage
- Add Air Freshener
- Check for Signs of Refrigerant Leaks
- Check Refrigerant Pressure (recommend to cust. If refrigerant needed)
- Check Air Filter (standard filter included. Recommend if hi eff. filter needs cleaned or replaced)
Geothermal System
- Check Loop
- Inspect and Clean Condensate Traps/Drains
- Check Loop Pumps
- Check Blower Motor and Capacitor
- Check Water Solenoid Valve
- Check Blower Wheel (recommend to customer if needs cleaned)
- Check Compressor
- Check Reversing Valve
- Check Condenser Fan Motor
- Check System Temperature Rise/Drop
- Test Capacitors
- Inspect Electrical Wiring and Connections
- Test all Controls/Switches/Relays/Contactors
- Check and Clean Coil
- Check Transformer
- Check for Signs of Refrigerant Leaks
- Check Refrigerant Pressure (recommend to customer if refrigerant needed)
- Measure Line Voltage
- Check Air Filter (replacement media filter or cleaning included)
- Check Thermostat
- Check Super Heat/Sub Cool
- Check Loop Pumps
- Check Temperature and Pressure In/Out
Air Conditioning
- Check Air Filter (replacement Media Filter or cleaning included)
- Check Blower Motor and Capacitor
- Check Blower Wheel
- Test All Controls/Relays/Contactors
- Check Transformer
- Measure Line Voltage
- Inspect Electrical Wiring and Connections
- Inspect Condensate Drains/Traps
- Check Thermostat
- Check Temperature Rise/Drop
- System Static Pressure
- Check Refrigerant Pressure
- Check Super Heat/Sub Cool
- Check Compressor
- Check and Clean Coils
- Check for Refrigerant Leaks
- Check High/Low Pressure Switches
- Check Condenser Fan Motor
- Test Capacitor
- Wax Unit
Platinum
Starting at
$61.08
Per Month Covers 2 Units
Program Benefits
- Meets Energy star recommendations
- Meets ACCA National Standard Task List qualifications
- 3 Year parts and labor warranty
- No Service Charge
- Same Day Priority Status for repairs
- Pre-Season Scheduling
- Minimum 10% discount in repair parts
- Discount on Accessories
- $50 per year Purchase Accrual, credit towards new equipment *Must remain in plan to keep accrual
- Media Filter replacement included
- 2 Year Inflation Protection, (price protected)
- Water Heater maintenance included
- Humidifier maintenance included and Pad replacement included
- Refrigerant Adjustment if needed
- Wax Outdoor unit
ACCA National Standard Task List
- Blower Wheel Cleaning
- Burner Cleaning
- Chemically Clean Coils
- Condensate Treatment
- Humidifier Check
- Media Filter Replacement
More Information
Gas or Electric Furnace
- Check Air Filter (replacement media filter or cleaning included)
- Check Blower Motor and Capacitor
- Check and Clean Blower Wheel
- Test All Controls/Switches/Relays/Contactors
- Check Transformer
- Measure Line Voltage
- Inspect Electrical Wiring and Connection
- Visually Inspect Heat Exchanger
- Check Gas Pressure Set-Point
- Check for Gas Leaks
- Check Heating Elements
- Check Sequencers
- Check Flame Sensor (cleaning included)
- Check Burners/Pilot/HSI (HSI or thermocouple is included)
- Check Inlet/Exhaust/Flue Pipe/Inducer
- Check Thermostat (replace batteries)
- Check System Temperature Rise/Drop
- Inspect Condensate Traps/Drains
- Add Condensate Treatment
- Test Safety Controls
- Check Pressure Switch Static Pressure
Oil Furnace or Oil /Gas Boiler
- Replace Nozzle (oil)
- Replace filter (oil)
- Check Blower Motor and Capacitor
- Check and Clean Blower Wheel
- Check Primary Control (oil)
- Check Transformer
- Check Oil Pump Pressure
- Measure Line Voltage
- Check and Adjust Electrodes (oil)
- Check for Oil Leaks (oil)
- Check Thermostat (replace batteries)
- Test All Controls/Switches/Relays/Contactors
- Check System Temperature Rise/Drop
- Check Inlet/Exhaust/Flue Pipe (cleaning included)
- Visually Inspect Heat Exchanger (minor cleaning included)
- Check Circulating Pump (boiler)
- Check T/P Pop-off Valve
- Check Fill System (boiler)
- Inspect Electrical Wiring and Connections
- Check Boiler Set-Point Temp (boiler)
- Check for water leaks (boiler)
- Test Safety Controls
- Check Zone Valves
- Check and Replace Boiler Filter
- Check Condensate Drains/Traps
- Check System Static Pressure
Heat Pump
- Check Defrost Control
- Check Air Filter (cleaning or replacement Media Filter included)
- Check Reversing Valve
- Check Blower Motor and Capacitor
- Check Compressor
- Check Transformer
- Check Condenser Fan Motor
- Check Thermostat (replace batteries)
- Test Capacitor
- Inspect Electrical Wiring and Connections
- Check and Clean Coils
- Measure Line Voltage
- Check for Signs of Refrigerant Leaks
- Check System Temperature Rise/Drop
- Check Refrigerant Pressure (up to 2 lbs per year included)
- Wax Unit
- Check and clean blower wheel
- Test all controls/switches/relay/contactors
- Check Super Heat/Sub Cool
- Check System Static Pressure
Geothermal System
- Check Loop
- Check Air Filter (cleaning or replacement filter included)
- Check Loop Pumps
- Check Blower Motor and Capacitor
- Check Water Solenoid Valve
- Check Transformer
- Check Condenser Fan Motor
- Check Thermostat (replace batteries)
- Check Reversing Valve
- Inspect Electrical Wiring Connections
- Test Capacitors
- Check System Temperature Rise/Drop
- Check Compressor
- Measure Line Voltage
- Check for Signs of Refrigerant Leaks
- Check Refrigerant Pressure (up to 2 lbs per year included)
- Inspect and Clean Condensate Traps/Drains
- Check and Clean Coil
- Check and Clean Blower Wheel
- Test All Controls/Switches/Relays/Contactors
- Check Super Heat/Sub Cool
- Check Loop Pumps
- Check Temperature and Pressure In/Out
Air Conditioning
- Check Air Filter (cleaning or replacement filter included)
- Check Blower Motor
- Check and Clean Blower Wheel
- Check Blower Capacitor
- Test All Controls/Relays/Contactors
- Check Transformer
- Measure Line Voltage
- Inspect Electrical Wiring and Connections
- Inspect and Clean Condensate Drains/Traps
- Check Thermostat (replace batteries)
- Check Temperature Rise/Drop
- System Static Pressure
- Check Refrigerant Pressure (up to 2lbs of refrigerant included)
- Check Super Heat/Sub Cool
- Check Compressor
- Check and Clean Coils
- Check for Refrigerant Leaks
- Check High/Low Pressure Switches
- Check Condenser Fan Motor
- Test Capacitor
- Wax Unit
Residential Plans
Price
Custom Quoted
by Halee Brumfield
*Refer to the Silver, Gold and Platinum boxes for base pricing
Commercial Plans
Price
Custom Quoted
by Rick Buckley
Heating Season
- Check air filters
- Tighten all electrical connections
- Check Blower wheel for cleanliness
- Check gas valve
- Inspect flue pipe and draft diverter
- Check operation of safety controls
- Clean and adjust burners
- Test and adjust pressure regulator
- Clean interior of manifold compartment
- Check and adjust belt tension
- Lubricate all necessary parts
- Check Baffles and inspect heat exchanger
- Clean and Adjust thermostat
- Test for gas leaks in furnace
- Check for combustible material near furnace
- Lubricate Blower motor
- Check furnace operation
- Make recommendations of any needed repairs
Cooling Season
- Check air filters
- Tighten all electrical connections
- Check blower wheel for cleanliness
- Check operating pressures
- Check for possible leaks if low
- Check operation of safety controls
- Inspect contactor contacts
- Clean and check condenser coil
- Check and record evaporator superheat
- Check and adjust belt tension
- Lubricate all necessary parts
- Check and record start and run amperages
- Clean and Adjust thermostat
- Check heating-cooling damper position
- Check condensate drain for blockage
- Lubricate condenser fan motor
- Inspect start-run capacitor
- Make recommendations of any needed repairs
Additional Items
Generator Inspection
As low as
$19.83
per month
- Replace Spark plug and oil filter
- Check and adjust valves
- Check gas pressure
- Test output voltage
- Test battery and battery charger
- Test transfer switch
Hot Water Tank
As low as
$9.58
per month
Included with Platinum plan
- Pull and Clean Burner
- Check and Clean Pilot
- Check T/P Pop Off Valves
- Check gas pressure
- Check Heating Elements
- Check Water Temperature Set Point
- Check for Water Leaks
Humidifier
As low as
$6.67
per month
Included with Platinum plan
- Disassemble and Check
- Inspect Pad (pad is included)
- Check and Flush Drain Lines
- Check Orifice and Solenoid
- Check Humidistat
- Check for Water Leaks
- Reset pad reminder (if active)
Media Filter
As low as
$5.08
per month
Included with Platinum & Gold plans
- Replacement Media Filter
- Size and MERV Vary
Gas Logs
As low as
$7.67
per month
- Check Gas Pressure
- Check Gas Valve and Shut Off
- Check Venting
- Check Pilot Light
- Check Safety Controls